Ceramic Coating at Complete Collision
Complete Collision & Auto Repair applies professional ceramic coating at our shop at 12110 Menchaca Rd in South Austin. Because we are a full body and paint shop, every coating starts with a proper inspection and paint correction, so the finish we lock in is one worth keeping.
What Ceramic Coating Is (and What It Is Not)
A ceramic coating is a liquid that is applied by hand to your paint and then cures into a thin, hard, transparent layer bonded to the clear coat. That layer is slick and hydrophobic, so water, dirt, and grime have a harder time sticking. It adds gloss and makes the car much easier to wash.
A ceramic coating is not armor. It does not make paint scratch-proof, and it will not stop rock chips or door dings. Anyone promising that is overselling. What it does well is resist light wash marring, chemical stains, bird droppings, water spotting, and UV fade far better than wax or a basic sealant.
Why Austin Heat and UV Make It Worth It
Central Texas is hard on paint. Long summers of direct sun break down clear coat, especially on dark colors and horizontal panels like the hood, roof, and trunk. Bird droppings and bug splatter bake onto hot paint and can etch the surface within days. Hard water from sprinklers leaves mineral spots that are tough to remove.
A ceramic coating gives the paint a sacrificial, UV-resistant layer that takes that abuse first. Contaminants sit on top of the coating instead of the clear coat, so they rinse off easier and are less likely to leave permanent marks.
Our Ceramic Coating Process
- Wash. A careful hand wash removes loose dirt without adding swirl marks.
- Decontamination. Iron fallout remover and a clay bar pull out brake dust, overspray, tar, and sap bonded to the paint.
- Paint correction. We machine polish the paint to remove swirls, haze, and light scratches. This is the step that decides how the coated car looks.
- Coating. The panels are wiped down to remove polishing oils, and the coating is applied panel by panel.
- Cure. The coating needs time to cure before it is exposed to water and washing. We tell you exactly how to care for it when you pick up the car.
Paint Correction Before Coating
A ceramic coating is clear. It magnifies whatever is under it, good or bad. Coating over swirl marks seals them in. That is why we inspect every vehicle under proper lighting and recommend the level of paint correction it needs first. Even new cars often arrive from the dealer with wash marring that is worth removing before coating.
If we find chips or scratches that go through the clear coat, polishing will not fix them. As a body shop, we can repair those with our paint and refinishing team before the coating goes on.
Ceramic Coating for Teslas and EVs
Many Tesla owners in Austin want their paint protected early. We already work on Teslas in our shop, from high-voltage battery service to collision repair, so we know these vehicles. A coating on a Model 3, Model Y, Model S, or Model X makes the large glass roof and dark paint colors much easier to keep clean.
How Long It Lasts and How to Wash a Coated Car
How long a coating performs depends on the product, how the car is stored, how many miles it sees, and above all how it is washed. When you request a quote, we explain what to expect from the coating we recommend for your vehicle.
- Hand wash with a pH-neutral shampoo and clean microfiber mitts
- Use the two-bucket method and rinse thoroughly
- Skip automated brush car washes and harsh degreasers
- Remove bird droppings and bug splatter promptly
- Dry with a soft microfiber towel or a blower
Ceramic Coating vs. Wax vs. Sealant vs. PPF
| Option | What it is | Best for |
|---|---|---|
| Wax | A soft natural or synthetic layer on top of the paint | Short-term shine; needs frequent reapplication |
| Sealant | A synthetic polymer layer that outlasts wax | Basic protection between details |
| Ceramic coating | A hard, hydrophobic layer that bonds to the clear coat | Long-term gloss, easier washing, UV and chemical resistance |
| Paint protection film | A clear, self-healing urethane film | Physical protection from rock chips and scratches |
Many owners combine them: paint protection film on the front end and other high-impact areas, and ceramic coating on the rest of the car (and often on top of the film).
Ceramic Coating Pricing
Every vehicle is different, so we do not list prices. The size of the vehicle, the condition of the paint, and the level of correction it needs all change the job. Call (512) 280-8008 or request a quote online.
Frequently Asked Questions
Does ceramic coating make my car scratch-proof?
No. A ceramic coating adds a harder, slicker layer that resists light marring, chemical etching, and UV, but it will not stop rock chips, keyed scratches, or parking lot dings. For impact protection, pair it with paint protection film.
Do I need paint correction before ceramic coating?
In most cases, yes. A coating locks in whatever is underneath it, including swirl marks and scratches. We inspect the paint and recommend the level of correction it needs before coating.
How do I wash a ceramic coated car?
Hand wash with a pH-neutral car shampoo, clean microfiber mitts, and the two-bucket method. Avoid automated brush car washes and harsh degreasers, and dry with a soft microfiber towel or air.
Can you ceramic coat a Tesla?
Yes. We coat Tesla Model 3, Model Y, Model S, Model X, and other EVs, and we can correct and coat a new vehicle before Texas sun and road grime have a chance to mark the paint.
How much does ceramic coating cost?
Every vehicle is different. The size of the vehicle, the condition of the paint, and how much correction it needs all change the job, so we quote each one individually. Call (512) 280-8008 or request a quote online.
Complete Collision & Auto Repair, 12110 Menchaca Rd #300, Austin, TX 78748. Open Monday through Friday, 8:00 AM to 7:00 PM, Saturday, 9:00 AM to 3:00 PM, and Sunday, 9:00 AM to 3:00 PM. Also see our car detailing services.